SA-410 is a specially formulated, polymer-modified, pre-blended dry powder material to be used as an adhesive for manufactured stone and stone veneer.
Ensure substrate and stone are both clean, dry and free of any bond-inhibiting debris. Using an electric mixer with a clean paddle, follow mixing instructions exactly as they appear on the bag. Apply SA-410 directly onto the rear of the artificial stone as well as on the substrate. Immediately adhere the stone into place, avoid any impact or vibrations to the piece when applying, as this may weaken the bond. Let cure for 24 hours.
50 lb. (22.6 kg) bag
12 months if properly stored.
Store in a cool, dry area above ground. Avoid direct sunlight and high temperatures surpassing 100°F (38°C)
3/8" Thickness 14-16ft²/bag